NEWS

Company news

Industry news

Maintenance work of carbide milling cutter

Maintenance work of carbide milling cutter

When the axis line of the cemented carbide milling cutter coincides with the edge line of the workpiece or is close to the edge line of the workpiece, the situation will be very serious, and the operator should do a good job in related equipment maintenance.

04

2023

/

08

Factors Affecting Drilling Speed of Bit

Factors Affecting Drilling Speed of Bit

The formation has a long sedimentary age, high hardness and heterogeneity, and high abrasiveness in some intervals; the borehole is unstable; the formation dip angle is large, the formation dip angle is 8~55 °, up to 85 °, and the formation is prone to natural deviating; the formation pressure system is complex, from negative pressure to abnormal high pressure staggered each other, with the diversity of vertical pressure system and the relative independence of horizontal pressure system; the large size borehole is long.

04

2023

/

08

Types of reamers

Types of reamers

Most of the reamer structure consists of the working part and the shank. The working part mainly plays the function of cutting and calibration, and the diameter of calibration place is inverted taper. The shank is used to be clamped by a fixture, with a straight shank and a tapered shank.

04

2023

/

08

Carbide milling cutter use

Carbide milling cutter use

Carbide milling cutters are generally mainly used in CNC machining centers, CNC engraving machines. It can also be installed on an ordinary milling machine to process some relatively hard and uncomplicated heat treatment materials.

04

2023

/

08

< 1 >